橡胶砂弹性动力学参数的弯曲-伸缩元试验研究     

姚玉文  刘方成  补国斌  景立平 《岩土力学》2020,41(7):2369-2379

橡胶砂作为一种廉价环保的土工材料，应用前景十分广阔，关于其力学特性的研究具有重要意义。采用弯曲–伸缩元法对橡胶砂进行了剪切波和压缩波联合测试，分别采用离散频率扫描法和初达波法确定了剪切波和压缩波的传播时间，进而得到其弹性动力学参数：初始剪切模量、侧限模量和泊松比，分析了橡胶含量和围压对橡胶砂弹性动力学参数的影响。结果表明：在同样围压下，随着橡胶含量的增加，橡胶砂初始剪切模量和侧限模量逐渐减小，初始泊松比逐渐增大；在同样橡胶含量下，随着围压的增大，橡胶砂初始剪切模量和侧限模量逐渐增大，初始泊松比逐渐减小。最后，在此基础上进行了两种因素耦合效应的分析以及相关力学机制的探讨。  相似文献   

成熟探区资源潜力评价:以松辽盆地敖南地区为例     

张文婧  包丽  彭建亮  付丽  王敬岩  韩昊 《世界地质》2020,(1):98-105

勘探实践证明,松辽盆地葡萄花油层成藏条件优越,具有“满凹含油”特征,是开展石油资源精细勘探的主力层系,剩余资源主要分布于成熟探区及其周边。优选位于成熟源岩区内的敖南地区作为典型刻度区,利用岩芯、测井和试油等资料,对葡萄花油层的源岩、储层及油藏进行了详细解剖和刻画,认为该区具备3个有利成藏的地质条件:①有效烃源岩控制油气分布范围;②三角洲前缘亚相薄互层砂体构成油气储集层;③砂体、构造匹配发育大面积岩性油藏。通过综合评价,确定敖南地区含油面积为256.3 km^2,采用容积法和油藏规模序列法估算该区资源量为5057.1×10^4 t,并获取运聚系数、可采系数和资源丰度等可代表资源评价的关键参数。  相似文献   

养殖水体环境参数随潮汐变化特征及相关性分析——以湛江特呈岛东近岸海域为例     

邢旭峰  黄妙芬  王忠林  孙忠泳 《海洋技术学报》2019,38(1)

利用2018年4-5月在湛江特呈岛东边海域养殖区内测定的数据,以及海事服务网提供的潮汐数据,分析了研究区域潮汐、流速和流向的变化规律,研究了溶解氧(Dissolved Oxygen,DO)、化学需氧量CODMn(Chemical Oxygen Demand)、二氧化碳CO2浓度和pH等海水环境参数随潮汐变化的特征以及相关性,建立了分别利用DO和pH值来估算海水CO2浓度的新算法,平均估算精度分别达到90%和95%。分析结果表明:(1)研究区域呈现不规则半日潮,流速随潮汐变化分为正相关和负相关两种类型;流向随着潮汐变化基本是东南与西北向;(2) CODMn的变化完全取决于涨落潮过程,涨潮时CODMn值逐渐下降,而落潮过程CODMn值逐渐上升;(3) CO2浓度呈现出明显的日变化,在午后数值达到最低值,不完全受制于潮汐过程的控制;(4) DO和pH两者的变化趋势高度一致,其变化过程与CO2浓度变化过程正好相反;(5)同一地点的海洋环境参数随潮汐涨落有很大的变异性,因而在进行空间大面海洋环境参数调查时,用某时刻的值代表该点的全天情况会出现较大的误差。  相似文献   

Study of Star/Galaxy Classification Based on the XGBoost Algorithm     

《Chinese Astronomy and Astrophysics》2019,43(4):539-548

Machine learning has achieved great success in many areas today. The lifting algorithm has a strong ability to adapt to various scenarios with a high accuracy, and has played a great role in many fields. But in astronomy, the application of lifting algorithms is still rare. In response to the low classification accuracy of the dark star/galaxy source set in the Sloan Digital Sky Survey (SDSS), a new research result of machine learning, eXtreme Gradient Boosting (XGBoost), has been introduced. The complete photometric data set is obtained from the SDSS-DR7, and divided into a bright source set and a dark source set according to the star magnitude. Firstly, the ten-fold cross-validation method is used for the bright source set and the dark source set respectively, and the XGBoost algorithm is used to establish the star/galaxy classification model. Then, the grid search and other methods are used to adjust the XGBoost parameters. Finally, based on the galaxy classification accuracy and other indicators, the classification results are analyzed, by comparing with the models of function tree (FT), Adaptive boosting (Adaboost), Random Forest (RF), Gradient Boosting Decision Tree (GBDT), Stacked Denoising AutoEncoders (SDAE), and Deep Belief Nets (DBN). The experimental results show that, the XGBoost improves the classification accuracy of galaxies in the dark source classification by nearly 10% as compared to the function tree algorithm, and improves the classification accuracy of sources with the darkest magnitudes in the dark source set by nearly 5% as compared to the function tree algorithm. Compared with other traditional machine learning algorithms and deep neural networks, the XGBoost also has different degrees of improvement.  相似文献   

PS测井在机场隧道地基勘查中的应用          下载免费PDF全文

范伟顺 《山东国土资源》2018,34(1)

PS测井技术是地震勘探方法之一,也是一种简便、快速、准确的原位测试技术。该文介绍了单孔法PS测井的原理及其在铁路工程勘察中的应用,主要包括根据等效剪切波,进行建筑抗震场地类别划分,铁路工程抗震场地类别划分。根据岩土动力学参数,达到评价岩体质量和划分围岩类别目的,利用剪切波速法估算岩土的承载力基本值。通过青岛机场隧道场地的工程实例说明了PS测井技术在岩土工程勘察设计中的应用情况及应用效果。  相似文献   

Photocatalytic Activity of Combustion Synthesized Nanocrystalline CeAlO3     

Parag A. Deshpande  S. T. Aruna  Giridhar Madras 《洁净——土壤、空气、水》2011,39(3):259-264

The photocatalytic activity of combustion synthesized nanocrystalline CeAlO₃ was determined for the degradation of four anionic and four cationic dyes. The perovskite oxide showed high‐photocatalytic activity and a complete degradation of all the dyes was possible within 2 h. The photocatalytic activity of the compound was comparable with the activity of the commercial Degussa P‐25 TiO₂ catalyst. The degradation of dyes was found to follow first order kinetics and the first order degradation rate constants were determined.  相似文献   

与观测方向无关的水平地震动参数计算方法     

任叶飞  代志勇  温瑞智 《世界地震工程》2011,27(3)

强震动记录的使用通常不考虑观测方向对于水平地震动参数计算的影响。文中以2008年汶川Ms8.0级地震中绵竹清平台获取的强震动记录为研究对象,对记录进行水平向旋转以模拟观测方向的变化,分析水平向峰值加速度PGA、峰值速度PGV、相对持时DR、绝对持时DA及谱加速度PSA随观测方向的变化情况。结果表明,PGA、PGV及PSA的计算较大依赖于观测方向,而DR和DA则受观测方向影响较小。为此文中提出了一种与观测方向无关的水平地震动参数计算方法,对于计算诸如PGA、PGV等与周期无关的地震动参数时不考虑周期独立;而对于计算诸如PSA等与周期有关的地震动参数时考虑周期独立。  相似文献   

流体包裹体成分物理化学参数的NET2.0C#语言计算程序   总被引：1，自引：0，他引：1  

王真光  王莉娟 《矿床地质》2011,30(4):754-758

根据地球化学热力学原理,利用流体包裹体成分测试数据和有关热力学原理,在原有基础上采用NET2.0 C#语言进行修编,编制成目前切实可行的计算机处理程序——矿物包裹体成分、物理化学参数的计算程序.其目的是方便广大地质工作者将这些参数用于地质找矿和科学研究中.  相似文献   

沉积物粒度分析方法的比较   总被引：5，自引：0，他引：5  

冉敬  杜谷  潘忠习 《岩矿测试》2011,30(6):669-676

近年来激光粒度分析法在沉积物粒度分析方面的应用得到了进一步扩展。本文利用美国麦克奇公司生产的S3500型激光粒度分析仪开展沉积物粒度分析方法实验,研究表明:S3500型仪器较优的样品用量约为0.2 g;稀释过程会影响样品的粒度分布;样品分取方式会带来不同的随机误差。与薄片图像法和筛析法两种传统粒度分析方法获得的粒度分布参数比较表明:激光法测得的平均粒径较薄片图像法和筛析法偏细;激光法和筛析法的峰度相关性较好。采用Malvern 2000和Micro S3500两种激光粒度分析仪测量结果的比较表明:Malvern 2000测得的平均粒径较Micro S3500测得的平均粒径偏细,但二者的相关性很好(r=0.9574),研究认为这两种粒度仪的测试结果会给岩石粒度定名带来差异。由于各种粒度分析方法存在差异和局限性,在实际工作中粒度分析应尽可能建立在同一测量体系上,以便资料对比。  相似文献   

Optimum design of stone column-improved soft soil using multiobjective optimization technique     

Kousik Deb  Anirban Dhar 《Computers and Geotechnics》2011

A combined simulation–optimization-based methodology is proposed to identify the optimal design parameters for granular bed–stone column-improved soft soil. The methodology combines a finite difference-based simulation model and an evolutionary multiobjective optimization model. A combined simulation–optimization methodology is developed for two different formulations: (a) the minimization of maximum settlement and the minimization of differential settlement subject to stress constraints; (b) the minimization of maximum settlement, the minimization of differential settlement and the maximization of the degree of consolidation subject to stress constraints. The developed methodology is applied to an illustrative system. Different scenarios are evaluated to examine critical field conditions. The solution results show that the modular ratio and the ultimate stress carrying capacity of the stone column are the most important parameters for optimal design. The obtained results also show the potential applicability of the developed methodology.  相似文献